signia miniPocket - Signal Strength Adjustment

20
Adju󰄋ing the signal 󰄋rength
The remote control works by emitting a high‑frequency audio
signal. This signal may be heard by those under 30 years old.
Two signal 󰘵rength levels of the control signal are available.
By default, the remote control uses the 󰘵ronge󰘵 setting to
ensure a reliable connection with your hearing in󰘵ruments.
A lower signal 󰘵rength can be chosen if the control signal
di󰘵urbs others. Be aware that this can a󰘯ect the reliability of
the connection.
To adju󰘵 the signal 󰘵rength:
XLock the remote control (red color visible).
XHold down the button on the remote control while switch‑
ing the key lock to the unlock position (green color visible).