09
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1427 PRODUCT CODE: 6568 04/2019
Before First Use
Installing the SD Memory Card
This camera uses SD memory card for data storage, please insert the SD memory
card correctly before you start.
NOTE: The SD card is the only data storage device in the camera, be sure to use
a good quality SD card.
Powering the Wildlife camera
This camera can utilise 2 different power sources making it versatile for all locations.
Battery Power
Where external power is not available the camera can be powered by either 4 or 8 x
AA batteries which are tted internally.
The unit will come with 8 x AA batteries in the box for your convenience.
8 x AA batteries will provide 12 months standby time, while 4 x Batteries will provide
for 8 Months standby time.
Where external power is available the camera can be run from a 6V DC power adapter
(sold separately).
CAUTION: Wildlife camera may not be powered using both power sources
simultaneously. Remove AA batteries before connecting the 6V DC power supply.
CAUTION: Wildlife camera does not support the charging of batteries.
NOTE: Alkaline LR6 batteries are recommended. We recommend using 4 x AA or
8 x AA batteries in (1.5V for each), camera voltage is 6V.
NOTE: A 6V DC power supply is optional and not included in this pack.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type.
To Next Page
Loading...