SIGNIFY EA1440 - Other Useful Information; Cleaning and Maintenance; Storage

AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1440 PRODUCT CODE: 6619 04/2019
14
Other Useful Information
Cleaning and Maintenance
• For safety reasons, always remove the battery before cleaning the Laser
Range Finder (see page 9 for instructions on how to remove the Laser
Range Finder battery).
• The Laser Range Finder is likely only to require regular “dusting” to keep
it clean. Use a standard duster, or dry soft microbre cloth to remove the
dust from the Laser Range Finder. Clean the dust from the Laser Range
Finder regularly.
• If the Laser Range Finder becomes soiled with anything other than dust
on its exterior, clean the exterior of the Laser Range Finder by wiping
over the surface with a slightly damp cloth and then polish with a soft
dry cloth.
• Be careful that you do not apply too much pressure when cleaning the
Laser Range Finder. There is a risk that you may break some parts.
• Do not use detergents or abrasive cleaners, and do not allow moisture,
water or other liquid to enter the Laser Range Finder.
Storage
Always remove the battery from the housing if the Laser Range Finder is not
being used for a long period (see page 9 for instructions on how to remove
the battery). Ensure that the Laser Range Finder and battery is stored in a
cool and dry ventilated location out of direct sunlight.