05 06
Operation Instructions
(Please refer to the actual size.)
Safety Installation
1. Each chair is designed to suppo the weight of one person only.
2. Please use the chair on a at, even suace.
3. Do not allow children under the age of 5 to sit on the chair without supeision.
4. Avoid sitting on the armrest to prevent potential accidents.
5. Do not stand on the chair, use it as a ladder, or step on it.
6. Please refrain from placing excessive weight on the chair or using it as a makeshift trolley.
7. Avoid using sharp or pointed objects that could damage the chair, and keep it away from
open ames or sources of heat.
8. For your safety, do not attempt to disassemble the gas lift mechanism.
Position the decorative cover and the gas lift into the central holes of the
chair leg base.
Place the seat and chair back at, aligning them with the base,
and t them onto the gas lift.
Inse the armrests into the armrest brackets. Use four armrest screws (M6X30),
four 6mm washers, and two armrest tube washers to secure the armrests to the
armrest brackets. The assembly is now complete.
Step 7
Step 8
Step 9
Q
S
P
R
J
O
The chair back and shoulder
rest have ve-level height
adjustment.
The armrest suace
adjusts upwards, rotates
inward/outward, and
moves forward/backward.
Dual-wing lumbar suppo
adjusts automatically to
wrap around the waist.
The armrest height is
also adjustable.
Pull the handle to slide the
seat cushion back and foh.
Pull the handle upwards to
adjust the chair's height,
and pull out to recline; push
it in to lock the recline at
three angles.