To Next PageTo Next Page
Need help?Do you have a question about the SIKA TPM 165 S-U and is the answer not in the manual?
General| Stability | ±0.05°C |
|---|---|
| Resolution | 0.01°C |
| Block Depth | 150 mm |
| Protection Class | IP20 |
| Power Supply | 50/60 Hz |
| Operating Temperature | 5°C to 40°C |
| Heating Time | Approx. 15 min to 165°C from ambient |
Warns about the danger of touching hot parts of the calibrator during operation.
Alerts users to potential damage caused by incorrect use of measuring inserts or heat transfer media.
Lists general safety regulations and best practices for working with the calibrator.
Details the functions of the controller's displays, buttons, and LEDs.
Explains how reference and set temperatures are displayed on the controller.
Describes how the LED OUT 1 indicates the active temperature control status.
Provides tables of heating and cooling gradient values for different calibrator types.
Explains the process of testing temperature sensors using the calibrator.
Warns about potential incorrect calibration results with earthed thermal elements.
Describes the actual steps during a calibration test.
Addresses common issues like sensor interruption, fan errors, and display problems.
Highlights the dangers of returning a dirty or contaminated device.
Details maintenance checks, recalibration, and component care.
