Need help?Do you have a question about the Siklu EtherHaul 500 and is the answer not in the manual?
General| Brand | Siklu |
|---|---|
| Model | EtherHaul 500 |
| Category | Network Hardware |
| Language | English |
Essential safety rules for installation and operation, especially in hazardous environments.
Lists standards for RF, EMC, Safety, Operation, Storage, and Transportation.
Statements regarding compliance with FCC Part 15 and IC RSS standards for digital devices.
Detailed technical parameters for V-Band operation, including frequency, modulation, and interfaces.
Step-by-step guide and diagram for mounting the ODU using the EH-MK-SM bracket.
Details on using PoE or a DC adapter for powering the EtherHaul unit.
Step-by-step instructions and diagram for establishing a protective earth connection.
Detailed steps for coarse and fine alignment of the ODU antenna using adjustment bolts.
Steps to confirm the RF LED is green and the link is operational after alignment.
Instructions for accessing the ODU via a web browser using its IP address.
How to use 'Apply' and 'Save Configuration' to commit and make changes permanent.
Initial setup step for configuring system name, date, and time for both units.
Configuring radio parameters like bandwidth, frequency, country, Tx power, and mode.
Setting up Ethernet port properties such as type, enable status, auto-negotiation, and speed/duplex.
Configuring IP addresses, default gateway, and SNMP manager settings.
Explains modulation table, CINR thresholds, and using spectrum analyzer for site survey.
Steps to verify correct installation and initial RF link operation.
To Next Page
