Need help?Do you have a question about the Siklu EtherHaul 600 and is the answer not in the manual?
Guidelines for selecting and preparing the installation site for the ODU.
Specifies the physical and environmental criteria for ODU installation sites.
Details the requirements for Ethernet and power cabling connections.
Provides instructions for mounting the EtherHaul ODU unit.
Instructions for connecting network and power cables to the ODU.
Details the available power options for the EtherHaul ODU.
Explains the procedures for properly grounding the EtherHaul system.
Overview of the antenna alignment process for optimal signal reception.
Detailed steps for performing coarse and fine antenna alignment.
Procedure to verify that the radio link is operational after alignment.
Steps to access and connect to the ODU via the web management interface.
Guides through the wizard for basic system parameter configuration.
Recommended procedures for verifying installation and link operation.
General| Frequency Band | 60 GHz |
|---|---|
| Throughput | Up to 1 Gbps |
| Modulation | QPSK to 64 QAM |
| Latency | < 1 ms |
| Interface | Ethernet |
| Mounting | Pole or Wall Mount |
| Range | Up to 1 km |
| Ethernet Ports | 2 x 10/100/1000 Mbps |
| Weight | 1.2 kg |
To Next Page
