EasyManua.ls Logo

Siklu EtherHaul 710 - User Manual

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© ALL RIGHTS RESERVED TO SIKLU COMMUNICATION LTD.
EtherHaul 500/600
Gigabit Ethernet Wireless Solution
Installation Manual
EH600-INST-05, Issue 3
March 2018

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Siklu EtherHaul 710 and is the answer not in the manual?

Summary

Safety and Regulatory Notices

FCC, IC, and Canada Statements

Regulatory statements from FCC, IC, and Canada regarding device compliance and operation.

1 Introduction to the EtherHaul System

1.3 Technical Specifications

Detailed technical specifications for the EtherHaul V-Band system, including performance and interfaces.

2 Installing the EtherHaul System

2.1 Preparing the Site

Guidance on selecting and preparing the site for EtherHaul ODU installation.

2.10 Aligning the Antenna

Procedures for performing coarse and fine alignment of the ODU antenna for optimal signal.

3 Performing Basic Setup Using the Web-Based Management

3.1 Connecting to the ODU Using the Web-Based Management

Instructions on how to access and log into the ODU's web-based management interface.

3.4 Quick Configuration Wizard

Using the wizard for basic system parameter configuration to start using the link.

4 Commissioning and Acceptance Procedure

4.1 Installation Verification and Testing

Procedures for verifying installation and testing the EtherHaul RF link's functionality.

Siklu EtherHaul 710 Specifications

General IconGeneral
Frequency Band71-76 GHz
Ingress ProtectionIP67
Throughput1 Gbps
ModulationQPSK, 16QAM, 64QAM
Ethernet Ports2x 10/100/1000Base-T
SecurityAES Encryption
Channel Bandwidth250 MHz
Data Rate1000 Mbps

Related product manuals