Siklu EtherHaul 710 - General Configuration Commands; Apply; Save Configuration

EH-500/600 Installation Manual
Page 35
 Current Alarms – list of currently active alarms and date&time raised.
 History Log – System alarms and events history log.
 User Activity Log – All configuration changes are logged, including user and
date&time (presented in the form of CLI commands).
Note:
To view logs, pop-ups must be enabled and allowed on your Internet Browser.
3.3 General Configuration Commands
3.3.1 Apply
Any configuration change is executed upon clicking Apply.
The Local-Remote concept of the Web-Based Management allows configuring both local
and remote systems of the link.
The Apply button is available at the bottom of each configuration page (one button for
both local and remote systems).
When clicking Apply, the configuration changes will be sent to remote system first and
then to the local system. If multiple parameters changed on the page before clicking
Apply, all parameters are sent in bulk to the system and then executed locally in order
to avoid losing management connection.
3.3.2 Save Configuration
Any configuration change applied should be saved using the Save
Configuration button.
Note:
Actual Layer 1 throughput depends on product's specs. Refer to the EtherHaul
Release Notes for exact specifications.