UM_FULL_53SL_REV_A 5
H. VALET MODE
When servicing or loaning your vehicle to others, the system should be placed in Valet Mode. Valet Mode prevents the
system from remote starting.
Enter Valet Mode:
1. Under the system unlocked, turn the ignition to “ON/ OFF/ ON” position.
2. Press and hold valet switch for 2 seconds until the LED turns “ON” solid.
The LED will remain on as long as the system is in Valet Mode.
Exit Valet Mode:
1. Turn ignition “ON/ OFF/ ON”.
2. Push and hold the valet switch for 2 seconds. The LED will turn off indicating the system is exiting the Valet Mode.
I. CAR LOCATOR (For 4-button transmitter only)
Under the system Locked, press the button to activate the car locator function. The horn will chirp 6 times.
The parking light will ash 12 times, assisting you in easily locating your car.
J. IGNITION CONTROL DOOR LOCK/UNLOCK (See feature bank 1-05)
If the vehicles door locks have been interfaced to the security system, the system will automatically lock the vehi-
cle’s doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”.
(Default setting is “OFF”)
K. TRUNK RELEASE OUTPUT
Press and hold the button on the transmitter for 3 seconds to remotely control the trunk release
L. SECOND VEHICLE SECURITY OPERATION. (For 4-button transmitter only)
Your 4-button remote transmitter can be utilized to control a second vehicle’s security system. To program the remote
control transmitter to a second vehicle, Press and hold the + buttons 2 seconds to select car 2 or car 1 opera-
tion. For Car 2: When the LED start 2 pause ash then release buttons.
For Car 1: When the LED start 1 pause ash then release the buttons.
To Next Page
Loading...
