Silent Sentinel Osiris - Page 11

Osiris-Jaegar – Installer Guide
Telemetry
Osiris Open Platform
Version n.nnn (xxxx) xx
SN: FFFFFFFF POST: 000000000
Disable OSD Off
Camera text Text1
Camera text X 2
Camera text Y 1
>Cardinal text
Cardinal text X 12
Cardinal text Y 0
Compass display TILT
Compass text X 15
Compass text Y 0
Datetime display TIME
Datetime X 2
Datetime Y 0
Prepos text Prepos
Prepos text X 15
Prepos text Y 0
Environmental X 24
Environmental Y 14
Which Camera PRIMARY
Exit menu
This section deals with all of the various messages that can be
overlaid onto the video display in order to assist the operator.
Default values shown. Scroll downwards to view further items.
Disable OSD - disables display of fixed OSD telemetry messages such as the camera text and date/time.
This option does not hide messages that are shown in response to user actions.
Camera text - This allows the camera-name text to be edited, (20 characters max).
Camera text X and Camera text Y - These control the position of the camera-name text on the screen.
Setting the X value to 0 will hide the camera text.
>Cardinal text - This opens a submenu for editing the cardinal position texts. There are 8 text strings
associated with the North, North-East, East, South-East, South, South-West, West and North-West compass
sectors.
Cardinal text X and Cardinal text Y - These control the position of the cardinal text labels on the screen.
Setting the X value to 0 will hide the text.
Compass display - The compass display shows the camera's Pan/Tilt co-ordinate or rate values. These can
be displayed as either ‘PAN’, ‘TILT’, ‘BOTH’; PRATE, TRATE, RATES.
Compass text X and Compass text Y - These control the position of the co-ordinate text on the screen.
Setting the X value to 0 will hide the display.
Datetime display - The time can be displayed as ‘TIME’ or ‘DATE’. The ‘DATE’ display includes the time.
Datetime text X and Datetime text Y - These control the position of the time text on the screen. Setting the
X value to 0 will hide the text.
Prepos text - This allows the text label shown beside the Preset position numbers to be edited, (default:
Prepos n).
Prepos text X and Prepos text Y - These control the position of the Preset position text on the screen.
Setting the X value to 0 will hide the text.
Silent Sentinel SilSen DN145003 - 1.2b (Fork)
11