Silent Sentinel Osiris - Page 14

Osiris-Jaegar – Installer Guide
Video settings
This section deals with the default video feed at power on and allows the level and gain to be adjusted for the
video outputs.
Osiris Open Platform
Version n.nnn (xxxx) xx
SN: FFFFFFFF POST: 000000000
Video feed 0 0
Video feed 1 0
Video level 0 36
Video gain 0 128
Video level 1 36
Video gain 1 128
Exit menu
Video feed 0 selects the default video feed at power on (0 - optical or 1 – thermal (if applicable)).
Video level 0 allows you to adjust the signal amplitude for the optical camera feed, (Default 36).
Video gain 0 allows you to adjust the signal gain for the optical camera feed, (Default 128).
Video level 1 allows you to adjust the signal amplitude for the thermal camera feed, (Default 36).
• Video gain 1 allows you to adjust the signal gain for the thermal camera feed, (Default 128).
Silent Sentinel SilSen DN145003 - 1.2b (Fork)
14