Silent Sentinel Osiris - Page 16

Osiris-Jaegar – Installer Guide
Appendix 2 – Startup POST information
Power On Self Test.
Osiris Open Platform
Version n.nnn (xxxx) C1
SN:FFFFFFFF Cam:001 E0000
P:PelcoD,9600,8N1 M:002
bqhept
Pan:00000000 Til:00000000
Version : Firmware version number and check code.
C1 : Firmware security code - {Factory use only}
SN: Main board serial number
Cam: Selected Camera/Device address number.
Exxxx : Extended functions selection - {Factory use only}
P: Pre-selected Protocol information;
(Protocol Name, Baud, Data/Parity/Stop bits)
M: Menu access Preset number, (EXT-POS).
Bqhept : Firmware status codes {Factory use only}
Pan: Til: Encoder power-on test count values – {For
servicing use}
Example values shown.
Silent Sentinel SilSen DN145003 - 1.2b (Fork)
16