Osiris-Jaegar – Installer Guide
Appendix 4 – Further information
WEEE statement
This equipment contains electrical or electronic components that must be recycled properly to
comply with Directive 2002/96/EC of the European Union regarding the disposal of waste
electrical and electronic equipment (WEEE). Contact your local supplier for procedures for
recycling this equipment.
Changes to control protocols
Keyboard manufacturers may update software or protocols in their keyboards without prior warning. This
may change the way in which the camera behaves in relation to keyboard operation. We can accept no
responsibility for such changes in keyboard manufacturer software and/or protocols.
Safety
Installation of this product should only be carried our by a competent and suitably qualified engineer. If you
are in doubt, you should refer the installation to a suitably qualified person.
Class.
This is a Class A product intended for use in non-residential/non-domestic environments.
If used in residential/domestic situations it may cause radio interference which will require the user to take
adequate remedial measures.
EMC
The Osiris PT platform is compliant with the provisions of the the EMC Directive (89/336 EEC) and the CE
marking Directive (93/68 EEC).
Appendix 5 – General Specifications
Mechanical
Construction Die-Cast hard anodised, powder coated aluminium, with A4 stainless fittings.
IP Rating IP67
Rotation Pan. Tilt.
Continuous (360º) +90º to -90º.
100º/sec [excl. ramping] 100º/sec [excl. ramping] Limited on some
configurations.
Presets 127 (repeatability 0.05º)
Tours 16 Preset Position tours – 60 steps each. 4 Mimic Tours – 5 minutes each.
Privacy Zones Max. 4 (Avoid Zones).
Telemetry RS485 (Simplex/Half-duplex) – multiple protocols
Power 28V DC (26-36VDC) 150W peak
Operational Temp -20 to +50ºC (-4 to 122ºF) [Ambient, Dry]
[-40ºC (-40ºF) with additional heating option]
Connection 10m composite multi-core cable with 10-way IP68 circular
connector, (Accessory).
Silent Sentinel SilSen DN145003 - 1.2b (Fork)
18