full ottoman
assembly instructions
Before you start you’ll need
· 2x Medium/Large Posi and/or Flat-head
screwdriver or similar
· Wooden/rubber mallet
· Large bradawl or similar
· Scissors
To avoid the risk of injury, it is recommended that a minimum
of two people assemble and install this product.
Castor/glide connection
1. Remove the ittings bag/instructions, and cut the
lid ties. Care should be taken as the lid will try
to open.
2. Close the lid and turn the base on to its side.
Locate and hammer home the 4 castors/glides
into the corner sockets.
3. Turn the base so it is sitting on the castors/glides
with the lid open.
4. Repeat for the second base.
5. Position the bases together.
To Next Page
Loading...