Getting Started with Silhouette CAMEO
20
Using an SD Card in your Silhouette
With the Silhouette CAMEO turned on, insert your SD card into the slot on the side of the machine.
Load your media into the Silhouette.
With the SD card inserted and your cutting mat/media loaded, press the Pause button on the
Silhouette CAMEO control panel to enter the SD card settings menu.
Use the Up and Down arrow buttons to highlight “Select File” and press Enter.
Using the Up and Down arrow buttons and the Enter button, navigate through the available folders on
your SD card to locate the file you want to cut. Many files will render a preview of the shape on the
right side of the LCD display.
Press Enter to choose a shape. On the main SD card settings menu you will now see the chosen
filename in brackets below the option “Select File”.
Use the Up and Down arrow buttons to select “Settings” and press Enter.
Using the Up and Down arrow buttons and Enter button, navigate through the various settings
including media settings (cut speed and force), cut size, number of copies, and the starting point.
Press the left arrow button to return to the main SD card settings menu once you’ve chosen the
desired settings.
Use the Up and Down arrow buttons to select “Cut” from the menu and press Enter to begin cutting.
When the cutting is completed, press Enter to unload your media. Remove the SD card when you are
finished.
Insert the SD Card into SD card slot
To Next Page
Loading...
