To Next PageTo Next PageWhat to do if my Silhouette DIM32D1BSSPR is flashing and beeping?
If the Silhouette Ice Maker is flashing and beeping, it means that the water tank is full. To resolve this, drain the excess water from the appliance or ensure that the drain pump is turned on so it can resume normal functioning.
Why is my Silhouette DIM32D1BSSPR Ice Maker flashing?
If your Silhouette Ice Maker is flashing, it could be due to a few reasons. First, the ice bucket might be full, so try removing some ice. Another reason may be that the appliance is low on water, so check that the water supply is working correctly. If neither of these resolves the issue, it could be a sensor failure, in which case you should contact an authorized service technician.
Why is the ice from my Silhouette Ice Maker not big enough?
If the ice from your Silhouette Ice Maker is not big enough or melts too quickly, there might be a few reasons. Ensure the door is properly shut and not opened too often. Also, keep the ice maker away from heat sources and direct sunlight. It's also possible that the chosen ice size setting is too small, and the ambient temperature or humidity is very high.
Why is the ice maker alarm sounding on my Silhouette Ice Maker?
If your Silhouette Ice Maker alarm is sounding, it is possible that the internal water tank is full or not enough water is entering the appliance from the water inlet.
What to do if my Silhouette DIM32D1BSSPR Ice Maker is leaking water?
If your Silhouette Ice Maker is leaking water, check the water inlet and drain hose connections to ensure they are not leaking. Also, make sure the drain caps on the ice bucket are completely closed.
General| Brand | Silhouette |
|---|---|
| Model | DIM32D1BSSPR |
| Category | Ice Maker |
| Language | English |
