Silicon Laboratories Si4010 - User Manual

Rev 0.2 6/12 Copyright © 2012 by Silicon Laboratories Si4010 Keyfob AES DEMO
Si4010 Keyfob AES DEMO
Si4010 KEY FOB AES DEMO KIT WITH EZRADIO® LCD
B
ASE BOARD USER’S GUIDE
1. Purpose
This user’s guide describes the use of the Demo Kit and gives the user a brief introduction to the AES
encryption/decryption algorithm. The current version of the firmware does not support remote mode, so it can only
be used in standalone mode without the Wireless Development Suite (WDS).
2. Kit Contents
The kit contains the following items:
Figure 1. LCD Base Board
Qty Part Number Description
1 4010-KFOB-xxx Si4010 universal key fob for 316.66/433.92/868.3/917 MHz
1 MSC-LCDBB930-AES LCD Base Board with C8051F930 MCU
1 4355-PRXBxxxB RF Pico Board with EZRadio chip for 316.66/433.92/868.3/917 MHz
1 MSC-AT50-xxx Antenna for 316.66/433.92/868.3/917 MHz
1 MSC-PLPB_1/2/3 Key fob plastic case
1 CR2032 CR2032 Coin Cell battery
3 AA 1.5 V AA battery
1 USB USB mini-B cable

Summary

Purpose of the Si4010 AES Demo Kit

Si4010 Keyfob AES Demo Kit Contents

Si4010 AES Demo Standalone Mode Requirements

Si4010 Key Fob AES Demo Description

RF Parameters for Si4010 AES Demo

Details center frequencies, modulation types, baud rate, and coding for RF communication.

Si4010 Key Fob Modulation Selection

Step-by-step guide to select OOK or 2FSK modulation on the key fob.

Si4010 RF Packet Format

Defines the structure of data packets transmitted by the Si4010 key fob.

AES Encoding and Decoding Process

Explains the symmetric AES128 encryption/decryption algorithm used in the demo.

Si4010 AES Demo Usage Guide

Si4010 AES Demo Schematics

Silicon Laboratories Si4010 Specifications

General

Brand	Silicon Laboratories
Model	Si4010
Category	Transmitter
Language	English