Silk'n Infinity - Tanned Skin and Sun Exposure

6
English
Warning Possible results Safety Tip
Do not use Silk’n
Infinity™ energy
levels 2-5 on tanned
skin or after recent
sun exposure
(including artificial
tanning machines).
Do not expose
treated areas to
the sun.
Treating with Silk’n Infinity™
energy levels 2-5 before or
after any sun exposure can
result in adverse eects such
as redness and skin discomfort.
Tanned skin, particularly following
sun exposure, contains large
quantities of the pigment
Melanin. This applies to all skin
types and complexions, including
those which don’t seem to tan
quickly.
The presence of large quantities
of Melanin exposes the skin
to higher risk when using any
method of light based hair
removal.
If you are using any energy level
higher than the lowest, avoid
exposure to the sun for 4 weeks
before and 2 weeks after your Silk’n
Infinity™ treatment!
Sun exposure includes unprotected
exposure to direct sunlight of over 15
minutes continuosly, or unprotected
exposure to diused sunlight of
over 1 hour continuosly. To protect
recently treated skin when exposed
to sunlight, be sure to thoroughly
apply sunscreen SPF 30 or higher,
for 2 weeks after each hair removal
session. Silk’n Infinity’s™ lowest
energy level (1) is designed especially
for safe use even after sun exposure.
After sun exposure you may continue
using Silk’n Infinity™, but only at the
lowest energy level.
Never use Silk’n
Infinity™ around or
near the eyes.
Although, Silk’n Infinity™ can
be used for the treatment of
facial hair, extra caution should
be used on the face to avoid
the eyes.
Silk’n Infinity™ has a built-in safety
feature for eye protection. It has
been designed so that a light pulse
cannot be emitted when the
TREATMENT SURFACE is facing
open air. The PULSE TRIGGER
enables treatment only when the
TREATMENT SURFACE is in contact
with the tissue.