SILKN Flash&Go - The Skin Color Sensor

To Next Page

To Previous Page

Everything there is to know about Flash&Go

Note: A

DISPOSABLE LAMP CARTRIDGE

should be replaced if

large spots appear inside it or if its

TREATMENT SURFACE

is broken.

When a

DISPOSABLE LAMP CARTRIDGE has reached 90% of its lifetime

the

REPLACE CARTRIDGE INDICATOR LIGHT on the

CONTROL PANEL

will start blinking, indicating that the

DISPOSABLE LAMP CARTRIDGE

should soon be replaced.

As the

DISPOSABLE LAMP CARTRIDGE usage is getting closer to 100%,

the blink on-time of the

REPLACE CARTRIDGE INDICATOR

LIGHT

will

grow longer.

Once all 1000 pulses in a

DISPOSABLE LAMP CARTRIDGE

have been

used the

REPLACE CARTRIDGE INDICATOR LIGHT

will be steadily

on, indicating that further pulses cannot be emitted. In order to

continue the hair removal session, it will be necessary to replace the

DISPOSABLE LAMP CARTRIDGE.

For full instructions please see chapter: “To Replace a Disposable

Lamp Cartridge”.

The Skin Color Sensor

Light-based hair removal on darker skin tones can result in

adverse effects such as burns, blisters, and skin color changes

(hyper- or hypo-pigmentation).

To prevent such misuse, a unique SKIN COLOR SENSOR in