Silva ADC Summit - Page 52

Altimeter Mode Setting
To Select the Setting Display
!
!
!
!
The following functions can be performed in
the Altimeter Setting Mode.
1) Altitude Alarm Settings,
a) ON or OFF
b) Target Altitude Level for alarm
2) Altitude Calibration
To select the setting display, press and hold
the [mode] button for about 2 seconds
(altitude digits will start flashing).
In the setting display, press the [mode]
button to select between the Altitude Alarm
Setting and Altitude Calibration Display.
Check the 'Altitude Alarm Setting' and
'Altitude Calibration' sections below for
more detail on the above settings.
Altimeter Mode - Altitude Mode Setting14.6.0
Altitmeter Mode
Altimeter Mode Setting Sequence
[mode]
Altitude
Calibration
Display
Altitude
Alarm
Setting
hold
[mode]
hold
[mode]
ALTITUDE m
734 80
144