Silva ADC Wind - Wind Chill Temperature Alarm

Temperature Mode - Wind Chill Temperature Alarm11.5
Wind Chill Temperature Alarm
Wind Chill Temperature Alarm Sound
!
!
!
!
!
The ADC is equipped with a wind chill
temperature alarm.
That alarm alerts user when the current
wind chill temperature is equal to or lower
than the preset wind chill temperature level.
In Temperature Mode: When the Current
Wind Chill Temperature is equal to or lower
than the preset wind chill temperature level,
the ADC starts beeping for about 5 seconds.
After the first beeping, the ADC will beep
again for every 2 minutes if the current wind
chill temperature holds at or below the preset
value.
The above repeated alarm will stop unless
the wind chill temperature equals or drops
below the preset value or the wind chill
temperature alarm is set to OFF.
The Wind Chill Temperature Alarm
0
Wind Chill
Temperature
Time
High Temperature Range
Low Temperature Range
'beep'
for 5
seconds
(every 2
minutes)
preset
wind chill
temperature
level