22
SEARCH / fast search forward/backward:
By pressing and holding the arrow keys (| and |) you can locate any point on the CD.
This search can only be performed in playback mode. As soon as the key is released, playback
begins at the point reached.
REPEAT / repeat function:
You can play a track or the entire disc repeatedly. To do this, press the "REP" button during
playback. Each time you press it, the function changes as follows:
Press once: “ONE” appears briefly on the display. The current track is repeated.
Press twice: “FILE” appears briefly on the display. All tracks in the current folder are repeated.
(This step only applies if an MP3 CD has been inserted).
Press 3 times: “ALL” appears briefly on the display. All tracks on the disc are played repeatedly
Press 4 times: “OFF” appears briefly on the display: Normal playback without repeat function.
USB
These functions allow you to play music data in MP3 format from a USB storage device.
Please note:
– In this mode only MP3 formats can be played.
– The playback capability of your MP3 data depends on the recording conditions such as PC
performance, software, etc.
– Insert the USB storage device (stick) directly into the socket; it is recommended not to use
any connection cables.
– Compatibility cannot be 100% guaranteed with all USB storage devices (sticks).
– To avoid possible damage to the USB storage device, the USB storage device may only be
inserted or removed in standby mode.
1. Insert a USB stick with MP3 music data into the USB port.
2. Turn on the device.
3. Use the function selection button to select “USb”. If no USB stick is plugged in, “NO” appears
on the display and the device switches to standby mode.
4. The number of folders and the total number of tracks will be displayed briefly, then playback
will automatically start from the first track.
5. To access or play the saved tracks, proceed as described under “Playing Audio CDs” or
“Playing MP3 CDs”.
AUX-IN function
You have the option of playing music from external audio devices via the audio input . To do
this, use an audio cable with a 3.5 mm jack (not included) .
1. Turn on the device.
2. Press the function selection button until AUX appears on the display.
3. Plug the 3.5 mm jack of the audio cable into the AUX connection socket and the other end
of the cable into your external audio device (MP3 player, CD player, ...).
4. Start playing the audio from the external device and the music will be played through the
speakers of this device.
To Next Page
Loading...