23
5. The various functions (skip, search, repeat) can only be controlled via the external audio
device.
6. Adjust the volume either with the volume control or on the external audio device.
Please note:
We recommend that you set the volume of your external audio device to maximum and adjust
the actual playback volume using the volume controls on this device. If the volume level of
your external device is set too low, there is a possibility that the device will turn off
automatically because the received input signal is too weak for detection. (See Power Saving
Mode).
Maintenance and Care
Treating a CD:
- To remove a CD from the holder in the cover, press the spindle in the
center of the cover and lift the CD up by the edges.
- Hold the CD only by the edges; do not touch the surface of the CD.
- If there is dust or other dirt on the surface, take a soft, dry cloth and
wipe from the center to the edges in a direct direction.
Do not use circular movements!
- Never use anti-static sprays, benzine, thinner or record sprays for
cleaning. These chemicals can damage the surface of the CD.
- Do not stick or write anything on the shiny side of the CD.
– Too high a volume can cause “skipping”. In this case, reduce the volume.
– Do not expose CDs to direct sunlight or extreme heat for long periods of time.
– Always keep your CDs in the case provided.
– Only play CDs marked with this symbol:
Cleaning the CD player:
To maintain perfect sound quality, it is necessary to keep the CD compartment free of dirt and
dust. Therefore, clean the inside of the CD compartment from time to time with a dry cotton
swab.
Do not touch the laser scanner!
Never use cleaning agents or solvents!
To Next Page
Loading...