24
Cleaning the housing:
Unplug the appliance before cleaning!
Clean the housing with a soft, possibly slightly damp cloth. Make sure that no water penetrates
the housing (ventilation slots).
Never use harsh cleaning agents, petrol or alcohol, and avoid using abrasive cleaning utensils.
The device must never be immersed in water or other liquids!
Helpful hints
If the device is not working properly, the following points may help you solve the problem.
Please make sure to check these before contacting a customer service center:
No electricity:
- Check that the power cord is firmly plugged in.
- Check that the socket is working properly.
- If using batteries: Insert new batteries.
Device does not respond to any inputs:
- Due to external electromagnetic influences, the built-in microprocessor may no longer
function properly. Unplug the device, wait a few minutes and plug it back in again.
No sound:
- Volume is set too low – turn the volume control “VOLUME” clockwise . .
- Check if headphones/earphones are connected to the connection socket.
Poor radio reception:
- Extend the telescopic antenna completely and rotate it in different directions until the best
possible reception is achieved.
- Check whether there are other electrical devices operating nearby that could cause
interference (microwave oven, hairdryer, vacuum cleaner, etc.).
No CD playback:
- Check if a CD is inserted.
- Check that the CD is inserted with the label facing up.
- Check if the pause button || has been pressed.
- Check that the “CD” function has been set.
CD “jumps”:
- Clean the CD.
- Check the CD for scratches or other damage.
- Make sure that the device is placed on a stable, vibration-free surface.
No playback from USB storage device:
- Check that the USB stick is inserted correctly.
- Check whether the music files are saved in the correct format (WMA, DRM data cannot be
read).
To Next Page
Loading...