9
silvercrossbaby.com
Using the cup holder
9.1 The cup holder can be
attached to either side of
the chassis handle. Attach
the cup holder by clipping
the cup holder clamp to the
chassis on the lower part of
the handle, ensuring the cup
holder is the correct way up.
9.2 Ensure the cup holder is
fastened correctly and the
clip is correctly engaged with
the locating pin.
9.3 To remove the cup holder,
unclip the cup holder clamp
from the chassis handle.
WARNING: DO NOT USE CUP
HOLDER WITH HOT LIQUIDS.
WARNING: THE CUP HOLDER
IS CAPABLE OF HOLDING A
MAXIMUM WEIGHT OF 340g.
9.1
9.2
9.3
To Next Page
Loading...
