Please observe following safety regulations to prevent any danger or accidents.
1. Be careful when connecting iron power cord, and check whether iron’s indicated voltage
matches with power supply socket voltage.
2. Fill water tank with clean water. Use of Silver Star's water purifier agent is recommended.
3. Be sure to disconnect the power plug from socket before filling water to water tank.
4. Be careful with steam leakage when connecting silicon hose to water tank and iron.
5. Do not connect multiple plugs to one power socket. There is risk of fire
(Fire Department recommended item).
6. Do not press steam switch continuously (more than 10 seconds). It is the cause of
flowing water instead of steam.
7. Do not press steam switch too hard. It causes the malfunction.
8. User shall always be near to the iron when in use. Iron’s power must be turned off and
its plug must be removed from socket when user needs to leave iron for a while.
9. Do not spray iron steam directly either to human body or animals. There is risk of burn injury.
10. Keep away any part of human body from iron’s bottom plate while in use.There is a risk of burn injury.
11. If the temperature control does not work and keep high temperature, stop
using it immediately and disconnect the plug, then contact authorized service center.
12. If water or other foreign materials entered into iron cover, turn off power by
disconnecting the plug and inquire authorized service center.
13. Remove iron’s power plug from socket when it’s lightning or thunders.
14. Do not let children touch or operate iron.
15. Be sure to change power cable by qualified technician from manufacturer or
service center when it is damaged.
16. Never touch or modify inner parts of controller in the iron because they are sensitive
parts. There is a risk of iron malfunction or fire if incorrectly handled.
17. Do not touch power cable or operate iron with wet hand. There is risk of electric shock.
18. To clean iron, disconnect power plug from socket and clean it after iron is cooled
19. Remove all steam inside iron and disconnect power plug from socket when iron is not using.
20. Hold power plug when disconnect it from socket. Do not pull out the power cable to
disconnect plug. It is the cause of fire or electric shock by short circuit.
21. Stop using iron, disconnect power plug and contact authorized service center when
there is any other sign or symptoms of trouble.
22. Our company does not have liability for any accident that occurred by not observing
above safety regulations or any accident caused by mistakes or carelessness by user.
Also, our company does not have liability for any accident during or after repair
of the iron by unauthorized person or at unauthorized place.
23. Please contact our head office or authorized service center if you have any question
product description or trouble.
Always be sure to observe above safety regulations. Manufacturer does not
have liability for any damages caused by not observing above safety regulation.
4
To Next Page
Loading...