SILVER Audio Processor 4Bmini User’s manual
Page 32/38
Audemat-Aztec SA – Audemat-Aztec INC
web: www.audemat-aztec.com - e-mail: contact@audemat-aztec.com
We could instead setup the dayparts as
DPO: F2:CHR - ALL 07:00 - 10:00
(factory preset 2 to run from 7AM everyday for 10 hours)
DP1: U4:NEW PRESET - ALL 10:00 - 02:00
(user preset 4 to run from 10am everyday for 2 hours)
which saves a daypart position.
By carefully selecting the default preset and overlaying dayparts we are able switch presets significantly more than
you first think you will be able to.
A/B COMPARISON FEATURE
The Remote application has two buttons labelled A and B that are located just below the connection button. These
buttons allow you to compare changes you have made to the processing against the saved preset. When you load a
preset the buttons should be greyed out but as soon as you make any processing changes these buttons will become
active. By selecting the B button you can temporarily revert back to the saved preset. During this time all the
processing controls will grey out to indicate you are in a compare mode. To return to the settings that you have been
adjusting click the A button and the processing controls will ‘un-grey’ If at any time you want to revert to the saved
preset and lose your adjustment just reload the preset from the preset selection window.
The A/B feature makes it easy to build up your own presets by being able to easily compare before and after
processing adjustments. We hope you find it useful.
To Next Page
Loading...