Silver 9300E - Page 38

Using the overcasting foot
1. Change the presser foot to the overcasting foot.
2. Sew the fabric with the fabric edge against the guide of the overcasting foot.
Attention: The overcasting foot should be used to sew with 06 and 09
only and do not set the stitch width narrower than "5.0". It is possible that needle could
hit the presser foot and break when sewing other patterns and width.
utility patterns
1. Change the presser foot to the all purpose foot.
2. Sewing the overcasting along the edge of the fabric so that the needle drops over the edge of
the fabric on the right side.
33
Using the all purpose foot
E
1
5.0~7.0
2.0~3.0
T
1
2.5~4.5
2.0~3.0
OVERCASTING STITCHES
2 3
2 3