Why does the needle thread keep breaking on my Silver 502 Sewing Machine?
The needle thread may break due to several reasons: * Improper threading of the needle thread. * Excessive needle thread tension. * A bent or blunt needle. * Incorrect needle insertion. * Failure to draw the fabric to the back after sewing. * Using thread that is too heavy or too fine for the needle.
Why is my Silver Sewing Machine running noisy and not smoothly?
Your Silver Sewing Machine may not run smoothly and may be noisy because threads are caught in the hook mechanism or the feed dog is packed with lint.
General| Brand | Silver |
|---|---|
| Model | 502 |
| Category | Sewing Machine |
| Language | English |
Essential safety guidelines for operating the sewing machine and preventing hazards.
Connect power supply, set spool pins, and operate foot control.
Details on light bulb, extension table, and accessory storage.
Changing needles, feet, and threading the machine, including bobbin handling.
Adjusting thread tension, stitch width, patterns, and length.
How to perform basic straight stitch sewing.
Techniques for altering sewing direction during operation.
Instructions for performing zigzag stitches.
Using stitches to prevent fraying and finish raw edges.
Guide to performing the tricot stitch.
Instructions for decorative shell tuck and feather stitches.
How to use satin and stretch stitch patterns for decorative effects.
Procedures for dismantling, cleaning, and assembling the hook race.
How to clean feed dogs, adjust belt tension, and oil the machine.
Common problems like noisy operation, thread breaks, skipped stitches, and puckering.
Issues with fabric feeding, machine not working, and unbalanced stitches.
To Next Page
