EasyManua.ls Logo

Silver 1035 - User Manual

Silver 1035
54 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Instruction Manual

Table of Contents

Questions and Answers

  • W
    William CameronAug 18, 2025
    Why does the upper thread keep breaking on my Silver 1035?
    • D
      dwallaceAug 18, 2025
      The upper thread may break on your Silver Sewing Machine due to several reasons: * The machine might not be threaded correctly, so rethread it. * The thread tension may be too tight; reduce it. * The thread could be too thick for the needle; select a larger needle. * The needle might not be inserted correctly; remove and reinsert it with the flat side towards the back. * The thread may be wound around the spool holder pin; remove the reel and wind the thread onto it. * The needle could be damaged; replace it.
  • S
    Shaun TorresAug 20, 2025
    What to do if my Silver 1035 needle breaks?
    • C
      Carrie JohnsonAug 20, 2025
      If the needle breaks on your Silver Sewing Machine, here are a few things to check: * The needle may be damaged, so insert a new one. * The needle might not be correctly inserted; ensure it's properly inserted with the flat side towards the back. * The needle size could be wrong for the fabric; choose a needle suitable for the thread and fabric. * The wrong foot might be attached; select the correct foot. * The needle clamp screw could be loose; tighten it with a screwdriver. * The presser foot might not be appropriate for the stitch you're using; attach the appropriate presser foot. * The upper thread tension could be too tight; loosen it.
  • B
    brennandanielAug 23, 2025
    Why does my Silver Sewing Machine skip stitches?
    • D
      daltonkimberlyAug 23, 2025
      Skipped stitches on your Silver Sewing Machine can occur for several reasons: * The needle may not be inserted correctly; remove and reinsert it with the flat side towards the back. * The needle could be damaged; insert a new one. * The wrong size needle might have been used; choose a needle to suit the thread. * The foot might not be attached correctly; check and attach it correctly. * The machine may not be threaded correctly; rethread it.
  • E
    Eric ElliottAug 26, 2025
    What causes loose stitches on my Silver 1035 and how to fix it?
    • L
      Laura MitchellAug 26, 2025
      Loose stitches on your Silver Sewing Machine can be caused by: * Incorrect machine threading; check the threading. * Incorrect bobbin case threading; thread the bobbin case as illustrated. * Wrong needle/fabric/thread combination; ensure the needle size suits the fabric and thread. * Incorrect thread tension; correct the thread tension.
  • B
    Barry WeissAug 28, 2025
    What to do if the lower thread breaks on my Silver 1035 Sewing Machine?
    • K
      Katherine KimAug 28, 2025
      If the lower thread breaks on your Silver Sewing Machine, consider the following: * The bobbin case might not be inserted correctly; remove and reinsert it, then pull on the thread to ensure it pulls easily. * The bobbin case could be threaded wrong; check both the bobbin and bobbin case. * The lower thread tension may be too tight; loosen it as described.
  • T
    tjacksonAug 30, 2025
    Why is my Silver Sewing Machine seam puckering?
    • M
      Morgan ScottAug 30, 2025
      Seam puckering on your Silver Sewing Machine can occur if: * The needle thread tension is too tight; loosen the thread tension. * The needle thread is not threaded correctly; rethread the machine. * The needle is too heavy for the fabric; choose a needle to suit the thread and fabric. * The stitch length is too long for the fabric; make the stitch denser.
  • S
    Stephanie NguyenSep 2, 2025
    Why is the seam gathering or puckering on my Silver 1035?
    • C
      Christine WrightSep 2, 2025
      If the seam is gathering or puckering on your Silver Sewing Machine, it could be due to: * The needle being too thick for the fabric; select a finer needle. * The stitch length being adjusted wrong; readjust the stitch length. * The thread tension being too tight; loosen the thread tension.
  • T
    turnertiffanySep 4, 2025
    Why are the patterns distorted on my Silver 1035?
    • R
      Rachel WongSep 4, 2025
      Distorted patterns on your Silver Sewing Machine can be caused by: * Using the incorrect presser foot; select the correct foot. * The needle thread tension being too tight; loosen the thread tension.
  • B
    Bruce ThompsonSep 7, 2025
    Why is my Silver Sewing Machine so noisy?
    • R
      Richard GarciaSep 7, 2025
      Your Silver Sewing Machine might be noisy due to: * Fluff or oil collected on the hook or needle bar; clean the hook and feed dog as described. * A damaged needle; replace the needle. * A slight humming sound coming from the internal motor; this is normal. * Thread caught in the hook; remove the upper thread and bobbin case, turn the handwheel backwards and forwards by hand, and remove the thread remnants.
  • C
    Christopher YoderSep 10, 2025
    What causes uneven stitches and feed on my Silver 1035 Sewing Machine?
    • B
      Brenda DavisSep 10, 2025
      Uneven stitches and feed on your Silver Sewing Machine may be caused by: * Poor quality thread; select a better quality thread. * The bobbin case being threaded wrong; remove the bobbin case, the thread, and reinsert correctly. * Pulling the fabric; do not pull on the fabric while sewing, let it be taken up by the machine.

Summary

Important Safety Instructions

General Safety Guidelines

Essential safety precautions to follow when using the sewing machine.

Principal Parts of the Machine

Accessories

Connecting the Machine to the Power Source

Polarized Plug Information

Details about the polarized plug and its safety features.

Starting the Sewing Machine

Start;Stop Button Operation

Operation of the start/stop button for machine control.

Foot Control

Instructions for using the foot pedal to control sewing speed and operation.

Changing the Presser Foot

Attaching and Removing Presser Feet

Procedures for attaching and detaching the presser foot and its holder.

Attaching the Edge;Quilting Guide

Instructions for attaching the edge or quilting guide accessory.

Replacing the Needle

Matching Needle, Fabric, and Thread

Guide for selecting the appropriate needle, fabric, and thread for sewing.

Winding the Bobbin

Inserting the Bobbin

Threading the Upper Thread

Using the Needle Threader

Thread Tension Adjustment

Raising the Lower Thread

Cutting the Thread

Two-Step Presser Foot Lifter

Raising and Lowering Feed Dogs

Machine Function Overview

Start;Stop Button Operation

Operation of the start/stop button for machine control.

Reverse Stitch Button

Using the reverse button for reinforcement stitches.

Auto-Lock Button Function

Function of the auto-lock button for securing stitches.

Needle Up;Down Position Button

Control for stopping the needle position during sewing.

Speed Limiting Adjustment Lever

Adjusting the machine's sewing speed.

Stitch Width Adjustment Lever

Regulating the stitch width for various patterns.

Stitch Length Adjustment Lever

Adjusting the stitch length for desired stitch density.

Pattern Selection Buttons

How to select different stitch patterns using the buttons.

Useful Sewing Skills

Sewing Corners Technique

Technique for sewing neat corners on fabric.

Using Reverse Stitching

How to use reverse stitching to secure seams.

Free Arm Sewing

Utilizing the free arm for sewing tubular items.

Installing the Extension Table

Instructions for attaching the optional extension table.

Sewing on Heavy Fabric

Tips for sewing thick or multiple layers of fabric.

Straight Stitches and Needle Position

Changing Needle Position

Adjusting needle position for straight stitch patterns.

Changing Stitch Length

Modifying stitch length for straight stitches.

Zigzag Stitching

Adjusting Zigzag Stitch Width

Controlling the width of zigzag stitches.

Adjusting Zigzag Stitch Length

Setting the stitch length for zigzag patterns.

Stretch Stitch Techniques

Overcasting Stitching

Using the Overcasting Foot

Instructions for using the overcasting foot for edge finishing.

Using the All-Purpose Foot

Technique for overcasting using the all-purpose foot.

Blind Hem;Lingerie Stitch

Button Sewing Guide

Buttonhole Stitching

Buttonholes on Stretch Fabrics

Procedure for creating buttonholes on stretchy materials.

Darning Stitch Technique

Zipper Insertion Guide

Inserting a Centered Zipper

Step-by-step guide for inserting a centered zipper.

Inserting a Side Zipper

Instructions for sewing in a side zipper.

Narrow Hemming Guide

Cording Techniques

Single Cording Application

Technique for applying single strand cording.

Triple Cording Application

Method for sewing with three strands of cording.

Satin Stitch Sewing

Quilting Techniques

Scallop Stitch Application

Gathering Fabric

Gathered Fabric Preparation

Instructions for gathering fabric.

Gather and Attach in One Step

Simultaneously gathering and attaching fabric.

Smocking Techniques

Free Motion Darning, Embroidery, and Monogramming

Free Motion Darning

Technique for free motion darning to repair fabric.

Free Motion Embroidery

Guidance on performing free motion embroidery.

Free Motion Monogramming

Steps for creating monograms using free motion.

Fagoting Stitch

Patchwork Stitching Guide

Using a Twin Needle

Using the Walking Foot

Machine Warning Functions

Warning Beeping Sound Codes

Understanding the machine's warning beep codes.

Bobbin Winder Spindle Position

Correcting the bobbin winder spindle position.

Machine Maintenance

Cleaning Machine Surface

Instructions for cleaning the exterior of the sewing machine.

Cleaning the Hook Area

Procedure for cleaning the hook and bobbin area.

Trouble Shooting Guide

Silver 1035 Specifications

General IconGeneral
BrandSilver
Model1035
CategorySewing Machine
LanguageEnglish

Related product manuals