Silver 1035 - Raising the Lower Thread; Cutting the Thread

1. Hold the upper thread with the left hand. Turn
the handwheel towards you (counterclockwise)
lowering, then raising the needle.
2. Gently pull on the upper thread to bring the
bobbin thread up through the needle plate hole.
The bobbin thread will come up in a loop.
3. Pull both threads to the back under the presser
foot.
Raise the presser foot.
Remove the fabric, draw the threads to the left
side of the face cover and cut using the thread
cutter.
The threads are cut at the proper length to start
the next seam.
Raising up the lower thread
Cutting the thread
15