Silver 1035 - Inserting a Side Zipper; Zipper Insertion

Inserting a side zipper
- Baste the zipper opening on the garment.
- Fold back to the left seam allowance.
Turn under the right seam allowance to form
3mm (1/8 inch) fold.
- Attach the zipper foot. Attach the right side of
the presser foot pin to the holder when sewing
the left side of the zipper. Attach the left side
of the presser foot pin to the presser foot
holder when sewing the right side of the
zipper.
- Stitch the left side of zipper from bottom to
top.
- Turn the fabric right side out, stitch across the
lower end and right side of zipper.
- Stop about 5cm (2 inches) from the top of
zipper. Remove the basting and open the
zipper. Stitch the remainder of the seam.
34
Zipper insertion
5mm