EasyManua.ls Logo

Silver 1035 - Overcasting Stitching; Using the Overcasting Foot; Using the All-Purpose Foot

Silver 1035
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fold the fabric as illustrated with the wrong side
uppermost.
Place the fabric under the foot. Turn the
handwheel forwards by hand until the needle
swings fully to the left. It should just pierce the
fold of the fabric. If it does not, adjust the stitch
width accordingly.
Adjust the guide (b) by turning the knob (a) so
that the guide just rests against the fold.
Sew slowly, guiding the fabric carefully along
the edge of the guide.
Turn over the fabric.
Blind hem/lingerie for firm fabrics
Blind hem for stretch fabrics
11:
12:
5mm 5mm
Overcasting
stitches
Reverse
side
Reverse
side
2.5~4.0
1.0~2.0
Please Note: It takes practice to sew blind
hems. Always make a sewing test first.
26
Blind hem/ Lingerie stitch
a
b

Table of Contents

Related product manuals