Starting sewing
Attention: Consult a qualified electrician if in doubt as how to connect the machine to the power
source. Unplug the power cord when the machine is not in use.
The appliance must be used with the foot controller C-9000 manufactured by CHIEN HUNG
TAIWAN., LTD.
With the sewing machine turned off, insert the
foot control plug into its connector on the sewing
machine.
Turn on the sewing machine, and then slowly
depress the foot control to start sewing.
Release the foot control to stop the sewing
machine.
Foot control
Start/stop button
The machine will start running when Start/stop
button is pressed and will stop when pressed the
second time.
The machine will rotate slowly at the beginning
of the sewing.
The speed limiting adjustment lever can control
the sewing speed. To increases the speed, slide
the lever to the right , To decrease the sewing
speed, slide the lever to the left.
4
To Next Page
Loading...
