Silver 9300E - Free Motion Darning, Embroidery and Monogramming; Darning

49
Remove the presser foot holder, and attach
the darning foot to the presser foot holder
bar. The lever (a) should be behind the
needle clamp screw (b). Press the darning
foot on firmly from behind with your index
finger and tighten the screw (c).
Move the drop feed control to " " to lower
the feed dogs.
First sew around the edges of the hole (to
secure the threads). Working from left to
right, sew over the hole in a constant and
continuous movement. Turn the work by 1/4
and sew over the first stitching moving the
work slower over the hole to separate the
threads and not form big gaps between the
threads.
Darning
a
b
b
aa
3.5~5.0
a
b
c
Please Note: Free motion darning is accomplished without the sewing machine internal
feed system. Movement of the fabric is controlled by the operator. It is necessary to
coordinate sewing speed and movement of fabric.
REE MOTION DARNING, EMBROIDERY AND MONOGRAMMINGF