57
5. Press the desired pattern number. (E.g.45)
7. Repeat step 4, 5, 6 for more patterns to be stored in the
memory.
Please Note: When the memory the full with 20 units of
patterns, the machine will beep to signal it.
8. Press " " button to leave the memory mode and return to
the normal screen.
Attention:
The selected pattern will be cleared from the memory module after closing the
machine if you do not press " " button again when you have completed your selection.
6. The selected pattern displays on the LCD screen and the
arrow move to the next position.
MEMORY
6
5
7
8
Press one time " " button, return original mode view,
press twice " " button, next mode view. LED light will
move step by step to select the stitch mode, as shown.
.
Press " ", " " button, select page
Press " " button, select page up. Press " "
button, select page down.
on-screen info
display
To Next Page
Loading...
