1. Place the thread and spool holder onto the spool pin.
For smaller spools of thread, place the spool holder
with the small side next to the spool or use the small
spool holder.
2. Snap the thread into the thread guide (Located
beneath the thread guide cover).
3. Wind the thread clockwise around the bobbin winder
tension discs.
4. Place the thread end through one of the inner holes in
the bobbin as illustrated and place the empty bobbin
on the spindle.
5. Press the bobbin winder stopper against the bobbin.
14
4
5
Bobbin winding
To Next Page
Loading...
