Inserting a side zipper
47
1. Baste the zipper opening on the garment.
2. Fold back to the left seam allowance. Turn
under the right seam allowance to form
a 3mm (1/8 inch) fold.
3. Attach the zipper foot. Attach the right side
of the presser foot pin to the holder when
sewing the left side of the zipper. Attach
the left side of the presser foot pin to the
presser foot holder when sewing the right
side of the zipper.
4. Stitch the left side of the zipper from bottom
to top.
5. Turn the fabric right side out, stitch across
the lower end and right side of zipper.
6. Stop about 5cm (2 inches) from the top of
zipper. Remove the basting and open the
zipper. Stitch the remainder of the seam.
ZIPPER INSERTION
ZIPPER INSERTION
To Next Page
Loading...
