3
Technical specifications:
230V+/-10%
140V
260V
50Hz 50Hz
1000VA
500VA
4.5A
2.3A
8A
3A
10A
12A
6.8A
9.1A
1500VA
2000VA
Input Output
High
Voltage
Protection
to
Voltage Freq. Voltage Freq. Power
Max.
Current
500VA
1000VA
1500VA
2000VA
All models are single phase.
Transfer time is under 0.5 seconds.
Waveform is sine wave, with no distortions.
Delay output time is between 6sec and 120sec.
High voltage protection is at 255V.
CAUTION!!!
ź Avoid overload.
ź Do not use the AVR over the maximum output power.
ź When connected to any device with built in motor compressor, the starting power is
generally several times higher than the device working power.
ź Make sure the maximum output power it’s not exceeded by the power of all electrical
equipment connected.
ź For color TVs, consider twice its power.
ź Make sure the AVR has the output voltage and frequency within your device
requirements.
ź Make sure the input voltage source complies AVR requirements.
ź Always use the AVR in an environment:
- well ventilated
- away from direct sunlight or other heat source
- out of reach from children
- away from water, moisture, oil or grease
- away from any inflammable substances
- secure and no risk of falling
ź The plug and output socket may look different,
depending on the country of the user.
Model
To Next Page
Loading...