What to do if my Silvercrest Steam Cleaner is not working?
If your Silvercrest Steam Cleaner isn't working, first, ensure it's properly connected to a mains power socket. If it still fails to operate and you suspect damage, contact the Customer Service department.
How to clean dirty removable fabric cover of Silvercrest Steam Cleaner?
The removable fabric cover can be machine washed at 60°C. Do not bleach or iron the fabric cover, and do not dry it in a tumble dryer.
How to troubleshoot a Silvercrest 280642 Steam Cleaner that is not working?
If your Silvercrest Steam Cleaner isn't working, start by checking the basics: * Ensure the plug is properly connected to a functioning mains power socket. * If the appliance is correctly connected and still not working, it may be damaged. In this case, contact the Customer Service department for assistance.
Why is my Silvercrest 280642 Steam Cleaner not producing steam?
If your Silvercrest Steam Cleaner isn't producing steam, it could be due to a couple of reasons: * The water tank might be empty. Refill the water tank with water. * The appliance may not be fully heated. Allow it to heat up until the green control lamp illuminates.
What to do if water drips from the steam nozzle 6 of Silvercrest 280642?
If water is dripping from the steam nozzle of your Silvercrest Steam Cleaner, it's likely that the temperature is too low. Wait until the appliance has heated up again.
Why is the steam volume low on my Silvercrest 280642 Steam Cleaner?
If the steam volume from your Silvercrest Steam Cleaner is low, the temperature might be too low. Wait for the appliance to heat up again.
What to do if water drips from the steam nozzle of my Silvercrest Steam Cleaner?
If water is dripping from the steam nozzle of your Silvercrest Steam Cleaner, the temperature may be too low. Allow the appliance to heat up again.
How to fix no steam on Silvercrest Steam Cleaner?
If your Silvercrest Steam Cleaner isn't producing steam, the water tank may be empty. Refill the water tank with water. Also, the appliance might not be heated up yet; wait until the green control lamp lights up.
What to do if water drips from steam nozzle Silvercrest Steam Cleaner?
If water drips from the steam nozzle of your Silvercrest Steam Cleaner, it is likely that the temperature is too low. Wait until the appliance has heated up again.
How to increase the steam volume on my Silvercrest 280642?
If the steam volume from your Silvercrest Steam Cleaner is low, it might be because the temperature is too low. Allow the appliance to heat up again.
General| Power | 1500 W |
|---|---|
| Steam pressure | 3.5 bar |
| Cable length | 5 m |
| Heat-up time | 3 minutes |
| Steam temperature | approx. 100 °C |
To Next Page
