Silvercrest 285662 - Alarm Control; Activating the Alarm Function; Deactivating the Alarm; Disabling the Alarm Function

20 GB/IE/NI
To apply a setting, wait until the time and the dot beside the alarm
type stop flashing.
Note: If you would prefer the „radio“ to be your alarm, the last
programmed radio station and volume will be broadcast.
Note: Nightlight will be switched on automatically while the alarm
(alarm tone/radio) is ringing. It will be switched off automatically
while the alarm is turned off.
Activate the alarm function
To activate the alarm function, press the DOWN / AL1 button
12
or
UP / AL2 button
13
briefly one or more times. A dot appears on the
display next to the alarm (1 or 2) symbolizing the waking up function
with alarm (
) or with the radio ( ).
Deactivate the alarm
To switch off the alarm for 24 hours, press the / FM / AM button
11
while the alarm is ringing.
Note: The product automatically stops the alarm after an hour if
the alarm has not been switched off manually.
Deactivate the alarm function
Press the DOWN / AL1 button
12
or the UP / AL2 button
13
repeat-
edly until the dot beside the alarm type (
= Alarm, = Radio)
goes away.