13 GB/IE/NI
Download the free „HealthForYou“ app from the Apple App Store
(iOS) or from Google Play (Android).
Depending on the settings of your smartphone, the
internet connection and transfer of data may incur an
additional cost.
Start the „HealthForYou“ app and follow the instructions. In the set-
tings menu of the app select and connect to the SAS 80. On the Activ-
ity Sensor a randomly generated six digit PIN code will be
displayed. At the same time, an entry field will appear on your
smartphone, where you should enter this code. Once you are suc-
cessfully connected, you can set your personal data. If you wish,
you can also activate / set up alarms, call / text notifications or a
move reminder.
Charging the Battery
As soon as the battery status display on the Activity Sensor
shows a flat battery, you must charge the battery. To charge the battery,
proceed as follows:
Insert the USB plug on your USB charging cable
2
into the USB
port of your switched-on computer.
Connect the magnetic closure of the USB charging cable
2
with
your Activity Sensor as pictured. Ensure that the charging cable is
To Next Page
Loading...
