24 GB/IE/NI
Warning! The displayed values are intended merely as a
visualisation and may not be used as the basis for therapeu-
tic measures. The software is not part of a diagnostic medi-
cal system.
We wish to expressly indicate that the software at hand is
not a medical product in accordance with the EU directive
93/42/EEC.
Note: During data transfer, button functions cannot be
executed.
To transfer measurements to your smartphone via Bluetooth
®
proceed as follows:
Manual transfer
Go to save mode (see „Saving, requesting and deleting
measurements“). As soon as the average value of all meas-
urements is displayed, a Bluetooth
®
connection will auto-
matically be established. The data will be transferred and
the Bluetooth
®
symbol will be shown on the display.
Switch the blood pressure monitor off by pressing the
START / STOP button
8
.
Automatic transfer
If you forget to switch off the blood pressure monitor, it will
automatically switch off after one minute. In this case, the
value will be saved in the selected user memory and the
data will be transferred if Bluetooth
®
data transfer has been
activated. The Bluetooth
®
symbol will be shown on the
display during transfer.
To Next Page
Loading...
