23 GB/IE/NI
If you have activated Bluetooth
®
data transfer, the data
will be transferred. The blood pressure monitor displays
the symbol for Bluetooth
®
transfer during transfer. Switch
the blood pressure monitor off by pressing the START /
STOP button once more.
To power down press the START / STOP button
8
.
Note: The device switches off automatically after one
minute if no button has been pressed. Wait for at least
5 minutes before taking another measurement!
Transferring measurements
via Bluetooth
®
You have the option of transferring the measured values
and values saved on your device to your smartphone using
Bluetooth
®
low energy technology.
Activate Bluetooth
®
in your smartphone settings and
open the „HealthForYou“ app.
Note: The “HealthForYou” app must be open for trans-
fer to occur.
Add „SBM67“ in the app.
A randomly generated six-digit PIN code will be shown
on the blood pressure monitor. At the same time, an en-
try field will appear on your smartphone, where you
should enter this six-digit PIN code. You can begin to
transfer your measurement values after the product has
been successfully connected.
To Next Page
Loading...
