Silvercrest 2IN1 - Reconnecting the Tablet to the Keyboard

GB
26
i
NOTE
It is easier to remove the tablet if you pull it up at a slight
left or right angle, rather than vertically.
Reconnecting the tablet to the keyboard
To reconnect the tablet to the keyboard, proceed as follows:
a) Align the hinge fitting on the keyboard so that the tablet dock is
pointing vertically upwards.
b) Now lower the tablet vertically and place the keyboard dock
on the tablet dock.
i
NOTE
Strong magnets are built into the tablet dock that keep
the tablet fixed to the keyboard. As soon as you begin to
feel the magnets pull when attaching the tablet to
the keyboard, you can carefully release the tablet.