" in the top centre. The tablet searches for
available devices. This process may take a moment. All available
devices are then displayed in a pop-up window.
e) Tap the device that you wish to connect to. The two devices
now connected to each other.
f) A short time later, the selected device will show the display of
the tablet.
20) Reset
If your tablet "freezes" and no longer responds, you can reset it.
Press and hold down the on/off switch for at least 10 seconds until
the device switches off.
Wait for about 20 seconds and then turn the device on normally.
i
NOTE
Any files that have not been saved will be lost when the
tablet is reset.
To Next Page
Loading...