Silvercrest 321581 1901

Questions and Answers:

M
Michael SanchezSep 6, 2025
What to do if espresso drips over the edges of the sieve holder of Silvercrest 321581 1901?
- J
  Julie LeeSep 6, 2025
  If the espresso drips over the edges of the sieve holder instead of from the openings, it could be due to a few reasons. First, ensure the sieve holder is correctly inserted. If it is, check if the sieve holder openings are blocked and clean the sieve holder if necessary. Also, make sure to clean any espresso powder residues from the edges of the sieve holder.
D
danielhughesAug 22, 2025
How to fix milk frothing problem on Silvercrest 321581 1901?
- J
  jeffreyvasquezAug 22, 2025
  If the milk is not being frothed by your Silvercrest Coffee Maker, check the "Milk quantity" knob. If it's pointing to the " " symbol or beyond, it's in cleaning mode; turn it to the left until it points to the " " symbol to produce milk froth. Also, the milk tank lid and/or the milk nozzle might be blocked. Clean them as described in the section "Cleaning the milk nozzle and milk tank".
J
Jimmy NunezSep 3, 2025
What to do if espresso drips over the edges of the sieve holder on my Silvercrest 321581 1901 Coffee Maker?
- J
  Janet ZhangSep 4, 2025
  If the espresso drips over the edges of the sieve holder instead of flowing from the openings in your Silvercrest Coffee Maker, ensure that the sieve holder is correctly inserted. Also, the sieve holder openings may be blocked and require cleaning. Another possibility is espresso powder residues on the edges of the sieve holder, so clean those residues off.
S
Shannon AndersonSep 2, 2025
Why is no espresso flowing out of my Silvercrest Coffee Maker?
- R
  Raymond HuynhSep 2, 2025
  If the espresso no longer flows out of your Silvercrest Coffee Maker, it could be due to a few reasons. First, the espresso powder might be too moist or compressed too tightly; try re-preparing the espresso, ensuring it's not compressed as much, or replace it entirely. Secondly, check if the water tank is empty and fill it with water if needed. Lastly, the holes of the sieve holder might be blocked, so give the sieve holder a good cleaning.
S
Susan PetersonSep 1, 2025
Why is my Silvercrest 321581 1901 Coffee Maker pump so noisy?
- E
  Erica AguirreSep 1, 2025
  If the pump of your Silvercrest Coffee Maker is unusually noisy, it might be because the water tank is empty. Fill the water tank with water.
W
William IngramAug 30, 2025
How to fix dark crema from Silvercrest Coffee Maker?
- Y
  Yolanda MartinezAug 30, 2025
  If the crema is too dark and the espresso runs out of the sieve carrier slowly when using your Silvercrest Coffee Maker, it could be because you're using too much espresso powder. Try using less espresso powder. Also, the powder might be too finely ground. Use only espresso powder that is specially produced for making espresso.
D
Debbie SmithAug 29, 2025
How to fix espresso not flowing in Silvercrest Coffee Maker?
- C
  cookjessicaAug 29, 2025
  If your espresso isn't flowing, here's what you can check: First, the espresso powder could be too moist or compressed too tightly. Try making it again without compressing it as much, or use fresh powder. Next, make sure the water tank is filled with water. Also, the holes in the sieve holder might be blocked, so clean the sieve holder.
T
Terry ReeseAug 27, 2025
Why is no espresso coming out of my Silvercrest 321581 1901?
- R
  Richard CoxAug 27, 2025
  There could be a few reasons why espresso isn't flowing. It might be due to overly moist or compressed espresso powder; try re-preparing with less compression or replace the powder. Another cause could be an empty water tank, so ensure it's filled. Lastly, check if the sieve holder openings are blocked and clean them if needed.
H
Heather StephensAug 27, 2025
What to do if espresso no longer flows out of my Silvercrest 321581 1901 Coffee Maker?
- A
  Angela MooreAug 27, 2025
  If the espresso is not flowing, several factors could be at play. First, the espresso powder might be too moist or compressed too firmly; in this case, try re-preparing the espresso, ensuring not to compress it as tightly, or replace the coffee powder entirely. Secondly, check if the water tank is empty and refill it with water if necessary. Finally, the sieve holder openings might be blocked; clean the sieve holder to resolve this issue.
E
Erin HansenAug 25, 2025
How to fix too light crema in Silvercrest Coffee Maker?
- J
  jessicamullenAug 25, 2025
  If the crema is too light and the espresso runs out of the sieve holder quickly, the coffee powder may be too fine or coarsely ground. Try using coarse coffee powder or coffee powder that is specially produced for making espresso.

Silvercrest 321581 1901 Specifications

General

Product Type	Coffee Maker
Model Number	321581 1901
Brand	Silvercrest
Keep Warm Function	Yes
Auto Shut-off	Yes
Water Level Indicator	Yes
Drip Stop	Yes
Removable Water Tank	Yes
Removable Filter Holder	Yes
Filter Type	Permanent Filter