24 GB
If you have activated Bluetooth
®
data transfer, the data
will be transferred. The blood pressure monitor displays
the symbol for Bluetooth
®
transfer during transfer. Switch
the blood pressure monitor off by pressing the START /
STOP button once more.
To power down press the START / STOP button
8
.
Note: The device switches off automatically after one
minute if no button has been pressed. Wait for at least
one minute before taking another measurement!
Transferring measurements
via Bluetooth
®
You have the option of transferring the measured values
and values saved on your device to your smartphone using
Bluetooth
®
low energy technology.
Activate Bluetooth
®
in your smartphone settings and
open the “HealthForYou” app.
Note: The “HealthForYou” app must be open for trans-
fer to occur.
Add “SBM69” in the app.
When connecting for the first time, a randomly generated
six-digit PIN code will be displayed on the device over
two lines. At the same time, an entry field will appear
on your smartphone where you should enter this six digit
code. When you have entered it correctly, the device is
connected with your smartphone and you can begin to
transfer your measurement values.
To Next Page
Loading...
