32 US-EN
Before first use and after every battery change:
When you insert batteries into the device, you will auto-
matically arrive at the relevant menu.
If batteries have already been inserted:
On the switched-off device, hold the settings button
SET
6
pressed for 5 seconds.
Now proceed as follows:
The time format will flash. Use the function buttons -/+
7
to set the format to 12-hour or 24-hour. Press the SET
button
6
to confirm. The year will flash.
Use the function buttons - / +
7
to set the year. Press
the SET button
6
to confirm.
The month will flash.
Use the function buttons - / +
7
to set the month. Press
the SET button
6
to confirm.
Configure the day, hour and minute consecutively as
described above. Press the SET
6
button to confirm
each entry.
The Bluetooth
®
symbol will be shown on the display.
“On” or “Off” will flash at the same time.
Using the function buttons “- / +”, choose whether you
want to activate (“On” flashes) or deactivate (“Off”
flashes) Bluetooth
®
data transfer. Press the SET button
6
to confirm.
If Bluetooth
®
is activated (“On”) data transfer will begin
automatically after the measurement has been taken.
Note: The battery life is reduced by transfer via Blue-
tooth
®
.
870_silv_Blutdruckmessgeraet_Content_US.indd 32 04.07.19 09:1
To Next Page
Loading...
